Saturday, February 6, 2010

Smith & Wesson M&P15-22



Had it at the range for the first time yesterday, and here's how things went.
Out of 175 rounds of Winchester Xpert .22lr bulk pack ammo, there were 3 failures to fire. Not bad at all for bulk .22lr. There were no failures to feed or eject, as long as you make sure to stagger the rounds in the mag (as seen here) there should be minimal feed issues.

Informal accuracy tests (monopoding off the magazine from the bench... forgot the sandbag) resulted in about 1 1/2" 5 shot groups at 50 yards. I expect some decent optics and a real rest should cut that down a little, but it is more than acceptable for carbine training and general plinking purposes.

The similarity in controls between a full size AR and the little made for simple immediate action when the gun failed to go bang.



Shooting buddy Will liked it as well. I foresee this little gun breaking in a few new shooters in the coming years. Light weight, manageable, and intuitive. No scary BANG! or hard recoil.



On that note, as far as the weight and the recoil go, at first the extreme light weight of the little rifle seem like it may be an issue. It feels about 1/3 the weight of Sigtyr, and switching from the Smith back to the "real" AR made you feel like you were hefting a howitzer or something.
I can see how some people would see this as a problem as far as training goes. It is a little snappier switching from target to target, especially with the AFG on there.

Light gun is light-


However I think the light weight makes the recoil a bit more noticeable. You could add weight inside the buffer tube and possibly under the handguard and beef it up a little, but that would reduce felt recoil, and if it were similar in weight to a 5.56 mid-length, I doubt there would be much, if any, felt recoil. While this could be ideal for new shooters, for a training tool, I'd rather have a bit of muzzle jump and notable recoil. Plus at it's current setup you can feel the difference between a regular shot, and bolt lock, much like you can on a full size AR.

That's right, I said bolt lock. Some people I've talked to still don't know that the M&P15-22 does in fact lock open on an empty mag and has a fully functional ping-pong paddle in roughly the same place as a standard AR. I say "roughly" as it is a little farther forward than normal, a little under 1/4" maybe, which isn't noticeable until you try to mount a Magpul B.A.D. lever. That requires some material removal from the front of the trigger housing. Worth doing in my case, as I have a B.A.D. lever on my full-size carbine, so reloading my little one is identical, and as pictured above, remedial actions are quite similar. However if you're not running a bolt assist lever of some sort, most operations will be the same as your AR out of the box. Like pretty much all .22lr ARs out there, there is no forward assist. Fine by me, I rarely use them anyway, and, in my opinion, they would be a potential hazard on a rimfire. (can you say out-of-battery detonation?)

Overall, I'm quite pleased with the little rifle. So far it seems more reliable than the GSG5 (way to curse it...) and a much more viable training option than my 10/22. Smith & Wesson definitely have a winner in this little carbine.

Now back to daydreams of cans...

Less than cool...

It seems Front Sight Institute is using the dash-cam video of Deputy Dinkheller death in the line of duty in a rather blatant attempt to sell class seats. (Link straight to Front Sight, click only if you want to get even angrier.)
I don't disagree that there's a lesson to be learned from the event, show it in classes, dissect it endlessly at Law Enforcement Academies, but using it for advertising purposes is pretty disgusting. I'm not familiar with Piazza, but I haven't seen much more than a lot of references to him pretty much sucking as a person.

Dang, now I'm gonna go to sleep all grumpy.

ETA: Apparently (from forum rumblings) the NRA has pulled all Front Sight advertisements from their publications. That makes me feel a little better.

Friday, February 5, 2010

Girls and Guns

A nice little gallery from Life Magazine.

(H/T to SayUncle)

Pic-O'the-Day

Pretty cool IMHO.

(Click to make big)

Range report forthcoming.

This story is relevant to my blogs...

Although I'm not a huge fan of Starbucks for the most part. (They tend to be out of my way, and the coffee's nothing special.)
But apparently the Brady Campaign is so hard up for stuff to do, that they're trying to petition Starbucks to ban open carry in their coffee shops. If they some how manage to pull this off (hah), then Caleb needs to start offering classes to die-hard Starbucks fans.
Unfortunately my preferred off campus coffee establishment is within a magical 1000ft. bubble of a middle school, so I can't carry there, despite the fun that it could be (it's a rather hippy-ish place, see prior posts). I could start making a pit stop at the Starbucks over by Walmart when I go shopping though.
Sometimes I wish the Brady Campaign would just curl up and die, but every so often they make me laugh...

(H/T to The Shoulder That Goes Up, via ENDO)

Wednesday, February 3, 2010

I kinda want one...

even though I'd have pretty much no use for it. But then again, when has that ever been a requirement for a gun purchase? And it's got a fun name, and I'd give it a go at a round of trap every now and again.
(h/t SayUncle)

Monday, February 1, 2010

Mini-Sigtyr



Finally have the silly thing in my hands. A standard Smith & Wesson M&P15-22, naked barrel and all. There was also some material removal required in the trigger guard area to get the BAD lever to fit, but I knew that ahead of time. Of course there were a few other parts swapped as soon as I got it home, and I'm still debating what to do with the pistol grip and what to do for optics.

On to the pictures and whatnot. Here it is with the full size.

As you can see, it's a little shorter. The length of pull is set the same, but as with all the dedicated .22lr platforms, the barrel comes back into the upper more than on a 5.56, so it looks shorter. As I said, the LOP is about the same, and the AFGs are the same distance out as well.

Here's the bolt assembly-

The bolt travels along the two rails, the black chunk in back acts as a polymer buffer, and the recoil spring guide easily comes out and allows the recoil spring to launch clear to the dining room.

Bolt face-

Pretty straight forward. Extractor on your left there, firing pin up at the top of the case notch area. You can also see how the rails are sitting at 7 and 2, which kinda messes with your head when you shotgun the rifle and look at the back end. You'll also notice the lack of an ejector.

That's because it's here-

It's connected to the back end of the barrel, which is a pretty simple solution to keeping the lower receiver from getting too cluttered.

So far, the only thing I'm really iffy on, is the charging handle.

It's plastic, and not at all near the size of a 5.56 one. Did I mention it's plastic? I think I'm going to contact S&W and find out about scoring a spare just in case. I might also send an email to BCM voicing interest in a 15-22 Gunfighter. I know I'm not the only one. (Scroll down a little bit, Optimus is my handle over there)

Overall, I think the wait was worth it, especially given the price (S&W gave me a Vet. discount, and my FFL takes care of service members). Hopefully it shoots as good as it looks, and the weight difference doesn't throw me off too much switching from the "little" one to the "full size" one. I've got a nice stack of magazines too, so my stash of .22lr bulk packs should start shrinking pretty soon. That is, assuming global warming ever kicks in and the glaciers retreat from the range.

This post brought to you by awesome carpets and New Glarus Totally Naked.

Sunday, January 31, 2010

Finally

Will be making the 40+ minute trek to the gun shop to pick up the M&P15-22 after my Glacial Geology class tomorrow. Look for initial thoughts in the evening.

Saturday, January 30, 2010

Not the first time I've heard of this...

The U.S. army medic also told members of the research unit that she and her colleagues had to explain to a local man how to get his wife pregnant.

I don't know if the female medic in the article is the same one I deployed with, but I know one of ours had this exact issue down at one of the ANA bases. Apparently he was boinking the wife the only way he learned as a young Pashtun, and that's not very conducive to procreation.

Post Gun-show chat

Me: Guy had an MP5SD there... wouldn't take my left nut for a trade though...
SB: I'd rather have an M16 if I was getting into FA, the upper possibilities are just too cool.
Me: Yeah, but there's just something too cool about the MP5SDs... when your gun goes "clackity-clackity-clack" instead of "bangity-bangity-bang"...

Monday, January 25, 2010

Question of the Night

Why hasn't anybody or when will somebody come out with rechargeable 123A batteries?

Disregard, my Google-fu was weak a little earlier. I guess the bigger question is why don't they market them to us gun people?

Upgrade pron

Got an Eotech to put on the carbine today. Looks pretty sexy.



Tried to take a picture of the reticle, and apparently laser generated holograms really freak out my camera. Any idea why it does this?



I've also added a FDE Magpul AFG, and will be swapping the CTR for an ACS when that shows up. I'll get some new pictures when there's actually a sun out so I can get some good ones.

Sunday, January 24, 2010

More than I can keep up with.

Soldier Systems has a bunch of A-TACS pictures from Shot.
The more I see it, the more I like it.

Food for thought.

Well, a video anyway. Care of Breda.


The continuing M&P15-22 Saga...

Back in late September, I sent in my order form for a Smith & Wesson M&P15-22 on their military discount program. Just as a general disclaimer, I'm not blaming them, or the shop I'm going through. I'm simply venting some gunny frustrations.
So anyway, just before October I send out the form, and it even says up to 6 months for long guns, so I'm being patient. Well, December rolls around, I get an email from S&W, "your dealer's FFL we have on file is expired, can you have them fax us a new one?" No big deal, call up the shop... "Huh. We just got a pistol from them this morning through the same program. Weird. We'll fax them it again just to make sure."
Cool. I sit back and wait for the charge to come through on my card, and dream of cheap AR fun.
Little did I know, the gremlins have intercepted the fax somewhere between the shop and S&W's Mil/LEO dept. I get a phone call from S&W mid-January, "Hey, we still don't have an up to date FFL for your order. The newest one for them expired in '08. We've got the guns in stock and I want to get it shipped out to you!"
Sweet. Grumbles...
Well, I'm not sleepy, even though I worked 11p-7a for the last week and a half straight, so I get in the car and drive the 45 minutes to the shop. Watch as they fax it in, again, and then talk with the guys there, fondle a SCAR (hadn't seen one in person yet, neat, but not for me) and finally get back in the car 2 hours later. Call up S&W to make sure it's on the right guy's desk.
"Yup got it right in front of me."
"Good, I'm sitting in the lot at the shop, so I wanted to make sure before I drove home."
"Ready to bust some heads huh? Ha."
"Guess I don't have to. Thanks again for helping me get this straightened out."
Go home, card's charged the next day, wait a few days, call up the shop to see if it came in.
"Oh yeah, I remember seeing it come in... not sure where it is though, we're in the middle of moving right now."
"So when are you guys gonna be settled in at the new place?" (I knew about the move, so I can't be mad about that. The ATF was dragging their feet on the change of address, go figure, so it was "any day now" planning. Just shitty timing for me.)
"About a week and a half."
"...Alright, guess I'll see you then...."

So now my new little .22 is sitting in rifle limbo. I'm glad it's a long gun. I don't think I could take a 3 day waiting period on top of all this.

Over 14 million guns sold in 2009

Only through NICS. So not counting f2f or states that allow you to skip the NICS with a CCW permit. Awesome and ridiculous all at the same time. Of course I did my part... one Henry .22, an AR, and the Sig... maybe a couple others I'm forgetting.

Today's blog coming to you from Emy J's

I picked up an Eee PC yesterday since my financial aid came in, and I have an online class this semester, so I claim it's for educational purposes. I'd much rather do the bulk of it from a comfy couch in a coffee house instead of at home where I have 35,897 distractions.
The side effect of course, is that hopefully I'll do this more, and add more coffee content, something I've been meaning to do.
Right now I'm on my second cup of the Latino Blend at Emy J's, a wonderfully smooth, somewhat dark roast with a nice bright finish. At least to my slightly educated tongue. Anyway, it's a very clean flavor, and quite good, especially for a blend.
There's also the side note of siding in one of the hippie havens of town wearing an Army Engineer t-shirt, writing about guns and military stuff, reading First In, and carrying my tiny PC in my fag-bag covered in my various Army patches. Needless to say, the lid of the tiny computer is adorned with a giant Magpul 10th anniversary skull and crossbones sticker. It fit perfect.
Compared to my freakin' 17" widescreen Toshiba, tiny PC is tiny! One of these days I'm going to take a picture of it sitting on the other one just for laughs. The supposed 11 hour battery time is insane-o awesome though.

Well I think he's a fantastic author.

And so does Sarah A. Hoyt. I pretty much cut my science fiction teeth reading Heinlein, and can pretty confidently say I have read almost everything he has written, most of it several times. (I'm on my third copy of Starship Troopers... I keep wearing them out, and I don't know how my copy of The Cat Who Walks Through Walls is still in one piece, it's beautiful testament to whatever publisher put out my particular copy...) To say he is my favorite author of all time would be an understatement.
Apparently there are people out there that don't like him. I think they're the same people who say Glocks are better than a 1911. And Sarah Hoyt seems to be in the same boat as me, only she's a much better writer than I, and put together a nice piece on the very subject.

Saturday, January 23, 2010

Things you should know...

before assembling an AR. Here's a list, and it looks like a pretty good one to me.
Confirmed this one this morning swapping the trigger guard on my buddy's AR.
Three hands are better than two. Four hands are too many, except when playing bridge.

More about the VLTOR Suppressor

Apparently the mount screws onto the barrel, and you can screw on whichever muzzle device you want that will fit inside the can. Pretty cool idea.

Thursday, January 21, 2010

Not really something I'd be proud of Dave...

Just saw this on the front of yesterdays local rag, and the post title pretty much sums up my thoughts. He may have a decent "success rate," but the last I heard, his overall approval rating wasn't looking so rosy.
I am proud to say I have never voted for Mr. Obey. He has completely lost touch with his constituents, and know it, yet has no fear of losing his seat anytime soon. I can only hope something akin to Massachusetts is on the horizon.(I know there's a pretty big push against Feingold that got a big morale boost, and I think the Journal may be running an article about that today... wonder how they'll slant it.)

To add: Today's story. Looks like they're putting on a brave face, but are deep down shaken. I do wish somebody could raise enough money to put up a decent fight against Obey though.

VLTOR VS-1

VLTOR unveiled their Volks Suppressor (VS-1) at Shot, an affordable "people's suppressor" that they're hoping to sell somewhere between $300-400. I definitely need to figure out that trust paperwork if this is true.

(more pictures and info from Gear Scout)

Dear Magpul;

Please don't send Chris and Travis to my house in the middle of the night to slap me in the face. I am not a hippie, just lactose intolerant. But the hemp milk the coffee house has does taste really good in hot chocolate, especially after snowshoeing for a couple hours.

That is all.

Wednesday, January 20, 2010

A-Tacs

Steve got a look at it at Shot Show. I like it for some reason. He says it's lighter than expected. I'll have to wait till I see some in person.

Update: Soldier Systems has some more pictures here and here. The way the rifle blends in the second one is downright impressive.

Elysian Tauros Venator

Haven't had a 40k post in a while, but Forgeworld put up the little Elysian wheeled vehicle they teased us with at the UK Games Day (It's like Shot Show for Games Workshop) a few months ago. I like the looks, and it's nice to see some wheels for the Imperium. You can pre-order here and enjoy more pictures here.
Two Hunter-killer missles and a Twin-linked Lascannon turret. That's a cute little air-dropable tank hunter if I ever saw one.

Tuesday, January 19, 2010

A little ray of hope®

I'll admit, amongst the bland mediocrity and dissapointment that is mid-winter in Wisconsin, the Massachusets election outcome makes me a little happier.

Leatherman MUT

Gear Scout has some pictures and stuff about Leatherman's first gun centric multi-tool. I may think about getting one to toss on the vest, looks like it could be pretty handy in the field. And if I was still a Combat Engineer, I would be lusting after that EOD version.



(pic from Gear Scout)

Update: They are now available for pre-order here. Thanks to Tom for providing the link.

Some Shot pictures

From pro photographer Matt Burkett here.
(h/t Caleb)

Remington Gas Piston

AAC has a teaser of the new Remington Gas Piston (RGP) drop in upper that apparently uses the ACR gas system. May be an option if you're looking for ACR technology but with a lower price. (Assuming it's avaliable at a lower price...)

(photo from AAC)

added: Steve has more pictures up at the Firearm Blog.

FBI Sting at Shot

Wow. Apparently as many as 22 people in the industry have been nailed with charges for bribing a government official after an FBI agent posed as a representitive of some African nation.
The defendants, including a senior Smith & Wesson sales official Amaro Goncalves, were accused of violating the Foreign Corrupt Practices Act, or FCPA, and conspiracy to commit money laundering tied to the sale of guns, body armor and other law enforcement equipment.

Tons of crazy.
(h/t to Steve)